Electrical
3-1/2", 1/4 IP, Zinc Plated, Lamp Nipple, Use In Repairing Or Making Lighting Fixtures & Lamps, Fit Inside Lighting Fixtures Or Lamps & Is Where The Wiring Or Cord Is Threaded Through, Can Also Be Cut To Size Or Connected With A Coupling Or Reducer To Adjust The Length.
Brown, Lamp Cord Feed Through On/Off Switch, Turns A Lamp On & Off At The Cord, For Use With Keyless Sockets, Use With #18 Spt-1 Lamp Cord.
1/4 IP, Brass Finish, Screw Collar Loop Kit, Used To Mount Light Fixtures To Junction Box, Requires A Canopy With 1-1/16" Center Hole, Includes 1 Each Of The Following: 4" 1/4 IP Flat Crossbar, Screw Collar Loop, 1/4 IP Lock Nut, 3/8 IP Lock Nut, 1/4 IP x 3/8 IP Hickey, 1/4 IP x 1-1/2" Nipple & 2 Each 8-32 x 1/2" Mounting Screws.
4", 1/4" IP, Zinc, Flat Crossbar, Use To Mount Light Fixtures To Junction Box, For Use With Light Fixture With 1/4 IP Nipple.
4", 3/8" IP, Zinc, Flat Crossbar, Use To Mount Light Fixtures To Junction Box, For Use With Light Fixture With 3/8 IP Nipple.
2 Pack, 1-1/4", 1/4-27 Thread, Nickel Finish, Pyramid Finial, Add A Decorative Flair To The Top Of A Lamp, While Holding A Lamp Shade In Place.
Brushed Pewter, Lamp Kit, With 10" Harp & Push Through Socket, Includes 1 Each Of The Following: 10" Brushed Pewter Lamp Harp, 8', 18 Gauge Silver Spt-1 Lamp Cord With Polarized Plug, Nickel Finish Push Through Socket, 660W, 250V Rated, 1" 1/4-27 Thread Nickel Finish Finial, Lamp Nipple, Coupling & Lock Nut.
12 Pack, 1/8 IP, Brass Finish, Check Ring, Assorted Sizes, Decorative Highlight To Cover An Opening On A Lamp Or Light Fixture, Use On A Lamp Made From A Bottle To Conceal The Bottle Adapter, Use With A Rubber Washer Over The Glass Shade On A Light Fixture To Cushion The Glass.
5"D, White, Modern Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws, Includes 1 Each Of The Following: 5" White Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer & 1/8 IP Lock Nut & 2 Each 8-32 x 1-1/2" Mounting Screws.
5"D, Oil Rubbed Bronze, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Brass Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Antique Brass Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Brushed Pewter Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, White Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, White, Blank Up Kit, Screw Holes 2-3/4" Apart, Decorative Piece Used To Cover The Outlet Box After Removal Of An Existing Ceiling Fixture, Uses A Crossbar Lockup, Securing The Blank Up To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Blank Up Canopy & Offset Crossbar & 2 Each Of The Following: 8-32 x 1-1/2" Mounting Screws & Brass Cap Nuts.